INCH-POUND
MIL-PRF-62410B(AT)
1 September 2011
SUPERSEDING
MIL-PRF-62410A(AT)
21 November 1995
PERFORMANCE SPECIFICATION
TUBE ASSEMBLY METAL: SWAGED HYDRAULIC,
(M1 TANK)
This specification is approved for use by the U.S. Army Tank Automotive Research,
Development and Engineering Center (TARDEC), Research, Development and
Engineering Command (RDECOM), Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the performance, design, and test requirements for
swaged hydraulic tube assemblies which provide hydraulic fluid, under pressure, to vehicle
hydraulic system components. Tube assembly is swaged, separable, flareless type, and threaded
one end to allow connection to standard fitting (see 6.2).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4710
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business