MIL-P-11087G(ME)
5. PACKAGING
5.1 Preservation. Preservation shall be level A.
5.1.1 Level A. The land-sealing surface of type I pipe shall be completely covered with a single wrap of barrier material conforming to MIL-B-121, type II, class 2. The wrap for the land-sealing surface shall be flush with the end of the pipe and shall extend back beyond the groove not less than 1/4 inch. The wrap of barrier material shall be covered with a single wrap of tape conforming to PPP-T-60, type IV, class 1. The tape shall be of a width that will completely cover the barrier material and shall extend not less than 1/8 inch beyond the end of the pipe and extend back beyond the barrier material not less than 1/2 inch. The end of the tape extending beyond the end of the pipe and the tape extending back beyond the wrap shall be rolled in place against the pipe and against the end face of the pipe.
5.2 Packing. Packing shall be level A or C as specified (see 6.2).
5.2.1 Level A.
5.2.1.1 Pipe (2- and 3-inch nominal size). The pipe shall be bundled seven pieces to the bundle. Each bundle shall be secured with not less than four flat steel straps conforming to ASTM D3953, type 1, finish B, with a minimum size and thickness of 3/4 inch by 0.035 inch and ASTM D4675. Straps shall be properly tensioned and sealed. The two end straps shall be
placed approximately 18 inches from the ends and the two intermediate straps shall be placed
equidistantly between the end straps.
5.2.1.2 Pipe (4- and 6-inch nominal size). The pipe shall be bundled seven pieces to the bundle. Each bundle shall be secured with not less than four flat steel straps conforming to ASTM D3953, type 1, finish B with a minimum size and thickness of 1-1/4 inch by 0.035 inch. Straps shall be properly tensioned and sealed. The two end straps shall be placed approximately
18 inches from the ends and the two intermediate straps shall be placed equidistantly between the end straps.
loose.
5.2.1.3 Pipe (8-, 10-, 12-, 14-, 16-, and 18-inch nominal size). The pipe shall be shipped
5.2.2 Level C. The pipe shall be packed to assure carrier acceptance and safe delivery to destination at lowest ratings in compliance with Uniform Freight Classification Rules or National Motor Freight Classification Rules.
5.3 Marking. In addition to any special marking specified in the contract or purchase order (see 6.2), marking shall be in accordance with MIL-STD-129.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business