MIL-P-11087G(ME)
4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3 and 5. The inspection set forth in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of any inspection requirements in the
specification shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling inspection, as part of manufacturing operations, is an acceptable practice to ascertain conformance to requirements, however, this does not authorize submission of known defective material, indicated or actual, nor does it commit the Government to acceptance of defective material.
4.1.2 Component and material inspection. The contractor is responsible for ensuring that components and materials used are manufactured, examined, and tested in accordance with referenced specifications and standards, as applicable.
4.2 Classification of inspection. Inspection requirements specified herein are classified as follows:
a. Quality conformance inspection (see 4.3). b. Inspection of packaging (see 4.5).
4.3 Quality conformance inspection.
4.3.1 Sampling. Sampling for examination shall be in accordance with MIL-STD-105. Sample size shall be determined by using MIL-STD-105, table I and table IIa. A lot shall be accepted when zero defects are found and rejected when 1 or more defects are found.
4.3.2 Examination. Samples selected in accordance with 4.3.1 shall be examined for the defects specified in 4.4.1. Presence of one or more defects shall be cause for rejection.
4.3.3 Tests. Pipes selected as specified in 4.3.1 shall be tested as specified in 4.4.2.1 thru
4.4.2.3. Failure of any test shall be cause for rejection.
4.4 Inspection procedure.
4.4.1 Examination. Pipe shall be examined as specified herein for the following defects:
101. Pipe not as specified (see 3.1).
102. Material not as specified (see 3.2).
103. Dimension of pipe not as specified (see 3.3.1).
104. Treated and painting to pipe not as specified (see 3.4).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business