MIL-DTL-25995D
1.2.4 Schedule. The schedule designators are as follows (see 3.4.2):
Schedule
designator
Schedule size
A
5
B
10
C
40
D
80
1.2.5 Configuration. The configuration designators are as follows:
Configuration
designator
Configuration
C
Coiled
S
Straight
1.2.6 Length. Length are expressed in feet. Lengths less than 100 feet (30.5 m) have a zero as a
prefix example: 050 specifies a 50 foot (15.25 m) length (see 6.4).
2. APPLICABLE DOCUMENTS
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract (see 6.2).
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI H35.1
-
Alloy and Temper Designation Systems for Aluminum
ANSI H35.2
-
Dimensional Tolerances for Aluminum Mill Products
(Copies of these documents are available online at https://www.ansi.org or from the American National
Standard Institute, 25 West 43 Street, 4th Floor, New York, NY 10036.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business