INCH-POUND
MIL-DTL-15119B(OS)
11 September 2012
SUPERSEDING
MIL-T-15119A(OS)
20 October 1976
DETAIL SPECIFICATION
TUBING, ROUND, SEAMLESS ALLOY STEEL
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers round seamless alloy steel tubing (see 6.1).
1.2 Classification. Tubing covered by this specification are of the following grades, as specified (see 3.2 and
Grade A No. 4130
Grade B No. 8630
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1916
-
DoD Preferred Methods for Acceptance of Product
DOD-STD-2101
-
Classification of Characteristics
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or https://assist.dla.mil.)
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05S, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or
emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A
FSC 4710
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business