INCH-POUND
MIL-T-85048
25 July 1991
SUPERSEDING MIL-T-8504A
22 September 1966
MILITARY SPECIFICATION
TU8ING, STEEL, CORROSION-RESISTANT (304), AEROSPACE VEHICLE HYDRAULIC SYSTEMS, ANNEALED, SEAMLESS AND WELDED
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements for special-quality, seamless and welded corrosion-resistant steel tubing in the annealed condition (see 6.1).
1.2 Classification. The tubing shall be of the following types, as specified (see 6.2):
a. Type I - Seamless
b. Type II - Welded and drawn
NOTE: Either type I or II may be supplied, unless a specific type is ordered.
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. (see 6.2)
SPECIFICATION FEDERAL
QQ-P-35 Passivation Treatments for Austenitic, Ferritic, and
Martensitic Corrosion-Resisting Steel
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:ASD/ENES Wright-Patterson AFB OH 45433-6503, by using the self-addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 4710
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business