INCH-POUND
MIL-DTL-25995D
14 May 2007
SUPERSEDING
MIL-DTL-25995C
22 November 2002
DETAIL SPECIFICATION
PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements for pipe, aluminum alloy, drawn or extruded in the
dimensions and weights specified, and a schedule of 5, 10, or 40 (standard), or 80 (extra heavy).
1.2. Part or Identifying Number (PIN). The PIN consists of the letter M, the basic specification
number, a letter for type designator, a number for the temper code, a number for the schedule size, and
designator for the configuration, up to three numbers for the length in feet a dash, and the quantity as
shown in the following example:
X
X
X
X
XXXX
M25995
Configuration and length in
Schedule size
designator (see 1.2.4)
Pipe size (1.2.3)
Temper code designator
(see 1.2.2)
Type (see 1.2.1.1)
Specification number
PIN example: M25995A2CCC025
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: VAI, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
Construction@dscc.dla.mil. Since contact information can change you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4710
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business