A-A-996 - Pipe, Plastic
AND10111 - Tubing, Minimum Bend Radii For Conduit And Fluid Line (S/S By Ms33611)
AND10112 - Standard Dimensions For Streamline And Oval Tubular Shapes (S/S By Ms33534)
AND10368 - Tolerances - Seamless Steel Tubing, Aircraft, Round (S/S By Ms33529)
AND10371 - Tolerances-Welded And Seamless Steel Tubing Shapes Other Than Round (S/S By Ms33532)
API-RP1110 - Pipelines, Liquid Petroleum, Pressure Testing Of
API-SPEC-5 - Drill Pipe, Specification For
This specification covers Group 1 and Group 3 drill pipe as described below in the sizes and wall thicknesses as shown in the standards list Table 1.1 and in the dimensional tables (Table 6.1 and Table 6.2).
API-SPEC-5 - Pipe, Line
This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, and double-extra-strong plain-end; as well as bell and through-the flowline (TFL) pipe.
API-SPEC-5CT - Casing And Tubing, Specification For
This specification covers casing, tubing and liners in the sizes and wall thicknesses applicable to the four groups of casing listed below and shown in Tables 1.1 1.2 1.3 and 1.4. This specification also covers pup joints, connectors, couplings, and thread protection.
API-STD-5 - Casing, Tubing And Line Pipe Threads, Threading, Gaging, And Thread Inspection Of (See Notice Of Withdrawal For Replacement Information)
This specification covers dimensional requirements on threads and thread gages and stipulations on gaging practice, gage specifications and certification as well as the instruments and methods for the inspection of threads for line pipe, round-thread casing and tubing, buttress casing and extreme-line casing joints.
AWWA-C106 - Cast Iron Pipe, Centrifugally Cast In Metal Molds, For Water Or Other Liquids - 9 May 80
AWWA-C111 - Rubber-Gasket Joints For Ductile-Iron Pressure Pipe And Fittings
This standard covers rubber-gasket joints of the following types for ductile-iron pressure pipe and ductile-iron and gray-iron fittings, valves, hydrants, and other appurtenances.
AWWA-C115 - Flanged Ductile Iron Pipe With Threaded Flanges - 1 Sep 1988 Awwa C-115 Must Be Used In Conjunction With Awwa C-110, C-111 & C-151
This standard pertains to ductile iron pipe sizes 3-54 in. and gray iron pipe sizes 3-24 in. for flanged pipe with threaded flanges for water or other liquids.
AWWA-C151 - Pipe, Ductile-Iron, Centrifugally Cast, For Water Or Other Liquids
This standard covers 3-in. through 64-in. ductile-iron pipe, centrifugally cast, for water or other liquids, with push-on joints or mechanical joints.
AWWA-C200 - Steel Water Pipe--6 In. And Larger
This standard pertains to electrically butt-welded straight-seam or spiral-seam pipe and to seamless pipe 6 in. in nominal diameter and larger that is intended for the transmission and distribution of water or for use in other water system facilities.
AWWA-C206 - Pipe, Steel, Water, Field Welding
This standard pertains to manual, semiautomatic, and automatic field welding by the metal arc-welding processes of steel water pipe that is manufactured in accordance with AWWA C200, Standdard for Steel Water Pipe 6 Inches and Larger.
AWWA-C214 - Tape Coating Systems For The Exterior Of Steel Water Pipelines
This standard covers the materials and application of tape coating systems in coating plants at fixed sites, using coating techniques and equipment as recommended by the tape coating manufacturer.
AWWA-C600 - Water Main, Ductile Iron, And Their Appurtenances, Installation Of
This standard covers installation procedures for ductile iron mains and their appurtenances for water service.
AWWA-C900 - Pipe, Pressure, 4 In. Through 12 In., For Water, Polyvinyl Chloride (Pvc)
This product standard pertains to 4-in. through 12 in. PVC pressure pipe made from Class 12454-A or Class 12454-B material providing a hydrostatic design basis (HDB) of 4000 psi and conforming with the outside diameter (OD) dimensions of steel pipe (IPS) or cast-iron pipe (CI) and with the wall thickness of DR series 14,18,or 25.
AWWA-M11 - Steel Pipe - A Guide For Design And Installation
AWWA-M23 - Pipe, Pvc - Design And Installation
This standard covers bench and hand shears used for cutting metal.
DOD-STD-2187 - Chemical Cleaning Of Salt Water Piping Systems (Metric)
This military Standard covers the general requirements governing the chemical agents, mobile treating equipment and procedure for the removal of deposits, scale and marine groth from salt water piping systems such as the firemain and flushing piping systems. This standard in intended for use by Navy approved private contractors or naval shipyards.
FED-STD-183 - Continuous Identification Marking Of Iron And Steel Products (See Notice 3 For Replacement Information)
FED-STD-48 - Tolerances For Steel Wrought Products, And For Centrifugally Cast Steel (See Notice Of Cancellation For Replacement Information)
L-P-00315 - Pipe And Tubing, Nonmetallic (Plastic) (S/S By Astm-D2239 And Astm-D3309)
This specification covers plastic pipe and tubing used to carry potable water.
L-P-00545 - Plastic Tubing (Polyethylene, Flexible) (S/S By L-P-315)
L-P-315 - Pipe, Plastic (Polyethylene, Pe, Sdr-Pr) (S/S By Astm-D3309 And Astm-D2239)
This specification covers polyethylene (PE) pipe made from 5 plastic pipe materials in 5 standard design ratios (SDR) and 5 water pressure ratings (PR).
L-P-320 - Pipe And Fittings, Plastic (Polyvinyl Chloride, Pvc, Drain, Waste, And Vent, Dwv) (S/S By Astm-D2665)
This specification covers polyvinyl chloride (PVC) drain, waste, and vent (DWV) pipe and fittings.
L-P-322 - Pipe & Fitting, Plastic (Acrylonitrilebutadiene Styrene,(Abs, Drain, Waste & Vent, Dwv)
MIL-B-13492 - Brass, Leaded, Tubing, Seamless
MIL-C-18159 - Chemical Cleaning Of Salt Water Piping Systems (Contents Of Spec Have Been Incorp Into Mil-Std-2187)
MIL-DTL-15119 - Tubing, Round, Seamless Alloy Steel
This specification covers round seamless alloy steel tubing (see 6.1).
MIL-DTL-23226 - Tube And Pipe, Corrosion-Resistant Steel, Seamless (Uns S30400, S30403, S34700, And S34800)
This specification covers the requirements for the manufacture, quality control, test, inspection, and shipment of weldable, annealed, seamless austenitic corrosion-resistant steel tube and pipe for general and high pressure service.
MIL-DTL-23227 - Tube And Pipe, Nickel-Chromium-Iron Alloy (Uns N06600)
This specification covers the requirements for the manufacture, quality control, examination, test, and shipment of weldable, annealed, seamless nickel-chromium-iron alloy tube and pipe, air melted, consumable electrode vacuum remelted or electroslag remelted for high pressure service.
MIL-DTL-23520 - Tube And Pipe, Nickel-Copper Alloy, Seamless, Air Melted
This specification covers the requirements for the manufacture, quality control, test, inspection, and shipment of weldable, annealed, seamless nickel-copper alloy tube and pipe, air melted.
MIL-DTL-25995 - Pipe, Aluminum Alloy, Drawn Or Extruded
This specification covers requirements for pipe, aluminum alloy, drawn or extruded in the dimensions and weights specified, and a schedule of 5, 10, or 40 (standard), or 80 (extra heavy).
MIL-L-24055 - Lining, Lead For Steel Pipe
MIL-L-2824 - Lining, Rubber (Synthetic), For Salt-Water Lines
MIL-N-24590 - Nickel Chromium Iron Alloy Heat Transfer Tubing
This specification covers the requirements for the manufacture, quality control, examination, test and shipment of weldable, annealed, seamless nickel-chromium-iron alloy tube, consumable electrode vacuum remelted or electroslag remelted for high pressure service and having special requirements for chemical composition, heat treatment and micro-structure.
MIL-P-11087 - Pipe, Steel: Grooved Or Plain Ends
This specification covers seamless welded steel pipe, plain or grooved ends. The pipes will be used for conveying refined petroleum products.
MIL-P-1144 - Pipe, Corrosion-Resistant, Stainless Steel, Seamless Or Welded (Future Acquisition Use Mil-P-24691/3)
This specification covers seamless and welded austenitic steel pipe intended for elevated temperature and general corrosive service, including cryogenic application. Specific temperature limitations are given in MIL-STD-777.
MIL-P-14529 - Pipe, Extruded, Thermoplastic
MIL-P-15692 - Pipe, Steel, Seamless And Welded, Black And Zinc-Coated (Galvanized) (S/S By Ww-P-404)
MIL-P-19119 - Pipe, Plastic, Rigid, Unplasticized, High Impact, Polyvinylchloride (Use Astm D-1785)
MIL-P-20167 - Steel, Plate, Marine-Boiler (S/S By Qq-S-691)
MIL-P-20220 - Pipe, Lead, Lining, For Iron Pipe And Steel Tubing
MIL-P-21264 - Pipe, Drainage, Zinc-Bituminous Coated, Corrugated Iron Or Steel, Unpaved And Paved (Use Ww-P-405)
MIL-P-22245 - Pipe And Pipe Fittings, Glass Fiber Reinforced Plastic (S/S By Astm-D2996)
MIL-P-22561 - Pipe And Pipe Fittings, Acid Resistant (S/S By Astm-C1053 And Astm-B861)
MIL-P-22634 - Pipe And Pipefittings, Polyethylene For Low-Pressure Waste And Drainage Systems
MIL-P-23290 - Pipe And Pipe Fittings, Iron, Saran Lined (S/S By Mil-P-22561)
MIL-P-236 - Pipe, Culvert, Nestable
This specification covers flanged and notched galvanized steel, and aluminum alloy nestable culvert pipe in diameters of 8-inches through 84-inches.
MIL-P-24338 - Pipe, Carbon Steel, Seamless
This specification covers the requirements for the manufacture, quality control, test, inspection and shipment of cold drawn and heat treated, weldable, seamless carbon steel pipe.
MIL-P-24608 - Pipe, Fittings, & Adhesive Kits, Glass Reinforced Thermosetting Epoxy Resin For Shipboard Piping Systems
This specification covers glass-reinforced thermosetting epoxy resin pipe, glass-reinforced thermosetting epoxy resin fittings, and thermosetting epoxy resin joint adhesive kits.
MIL-P-24691 - Pipe And Tube, Carbon, Alloy And Stainless Steel, Seamless And Welded, General Specification For
This specification covers carbon, alloy, and stainless steel seamless and welded pipe and tube.
MIL-P-24691/1 - Pipe And Tube, Carbon Steel, Seamless
MIL-P-24691/2 - Pipe And Tube, Chromium-Molybdenum Steel, Seamless
MIL-P-24691/3 - Pipe And Tube, Corrosion-Resistant, Stainless Steel, Seamless Or Welded
MIL-P-2780 - Pipe, Brass, Seamless, Iron-Pipe Size, Standard And Extra Strong (Use Ww-P-351)
MIL-P-28584 - Pipe And Pipe Fittings, Glass Fiber Reinforced Plastic, Adhesive Bonded Joint Type, For Condensate Return Lines
This specification covers plastic pipe and fittings made from epoxy resin and glass fiber reinforcement, together with epoxy adhesive necessary for joint assembly, for continuous service up to 125 pounds per square inch (psi) operating pressure at 250 degrees Fahrenheit (Deg. F) in condensate return lines.
MIL-P-29206 - Pipe And Pipe Fittings, Glass Fiber Reinforced Plastic, For Liquid Petroleum Lines
This specification covers a reinforced plastic pipe and fittings system made from epoxy or polyester resin and glass fiber reinforcement, together with adhesive for joint assembly, intended for service up to 150 degrees Fahrenheit (Deg. F) and 150 pound-force per square inch (psi) operating pressure and surges up to 275 psi in liquid petroleum lines installed below ground.
MIL-P-3107 - Pipe, Steel: Water-Well, With Coupling (S/S By Astm-A589)
MIL-P-52189 - Plastic Tubing, Laminated, Thermosetting, Nylon Fabric Base, Phenolic Resin
MIL-P-52559 - Pipe, Steel, Weight-Coated, For Submarine Pipeline Systems
MIL-P-82054 - Pipe And Fittings Asbestos Reinforced Thermosetting Plastic
MIL-P-82056 - Pipe And Pipe Fittings, Plastic, For Drain, Waste, And Vent Service (S/S By Astm-D2661 And Astm-D2665)
MIL-P-82090 - Pipe, Coupling, Steel (Buttress Thread)
MIL-PRF-62410 - Tube Assembly Metal: Swaged Hydraulic, (M1, Tank)
This specification covers the performance, design, and test requirements for swaged hydraulic tube assemblies which provide hydraulic fluid, under pressure, to vehicle hydraulic system components. Tube assembly is swaged, separable, flareless type, and threaded one end to allow connection to standard fitting (see 6.2).
MIL-STD-1627 - Bending Of Pipe Or Tube For Ship Piping Systems
This standard covers pipe bending, heat treatment, and inspection requirements and acceptance criteria for piping used for ships of the United States Navy.
MIL-T-0020155 - Tube And Pipe, Carbon-Molybdenum Alloy Steel, Seamless (Astm A-335-55R, Grade P-1)
MIL-T-10794 - Tubes, Aluminum-Alloy, Extruded Pipeline Section, With Grooved Nipple Welded On Each End
MIL-T-13322 - Tubing, Brass, Seamless (For Primer Bodies)
MIL-T-1368 - Tube And Pipe, Nickel-Copper Alloy, Seamless And Welded
This specification covers tube and pipe for use where the strength and corrosion resistance of nickel-copper alloy (Monel) are required.
MIL-T-15005 - Tubes, Condenser And Heat Exchanger, Copper-Nickel Alloys (Uns C70600 & C71500)
This specification covers copper-nickel alloy condenser and heat exchanger tubes for sea water service.
MIL-T-15089 - Tubing, Aluminum Alloy, Round, Seamless (For Rocket Motors)
This specification covers aluminum alloy, seamless, round tubing for use in the manufacture of rocket motors.
MIL-T-16286 - Tube, Steel, Seamless, Marine Boiler Application
This specification covers requirements for various classes of seamless steel tubes for use as water tubes and superheater tubes in high pressure steam generators.
MIL-T-16343 - Tubing, Steel, Carbon, Structural (S/S By Astm-A500)
MIL-T-16420 - Tube, Copper-Nickel Alloy, Seamless And Welded (Copper Alloy Numbers 715 And 706)
This specification covers two compositions of round copper-nickel alloy tube for basic piping systems on surface ships and submarines as referenced in MIL-STD-777 and MIL-STD-438. Tube and pipe sizes permit the use of Naval fittings designed for brazed or welded connections.
MIL-T-16690 - Tubing, Steel, (8640, 8740, 4135 Or 4140) Seamless, Mechanical (Use Astm A519)
MIL-T-16992 - Tube, Aluminum-Brass Arsenical (Copper Alloy No. 687), Condenser And Heat Exchanger
MIL-T-17011 - Tubes, Copper, Condenser And Heat Exchanger
MIL-T-17168 - Tube And Pipe, Wrought Iron, Welded (Navy)
MIL-T-17188 - Tube, Carbon Steel, Electric Resistance Welded, Marine Boiler
MIL-T-17339 - Tubing, Aluminum Alloy, Clad, Round, Seamless (For Rocket Motor)
MIL-T-18063 - Tube And Pipe, Corrosion-Resisting Steel, Seamless And Welded, Nuclear Plant Service
MIL-T-18165 - Tube & Pipe, Chromium-Molybdenum Alloy Steel, Seamless (Future Acquisition Use Mil-P-24691/2)
MIL-T-18912 - Tubing, Steel, For 3.25 Inch And 5.O Inch Od Rocket Motors
This specification covers cold-drawn seamless steel tubing for use on 3.25-inch and 5.0-inch O.D. rocket motors.
MIL-T-20155 - Tubing, Steel, Alloy, Molybdenum, Seamless
MIL-T-20157 - Tube And Pipe, Carbon Steel, Seamless
MIL-T-20168 - Tubes, Brass, Seamless (S/S By Astm-B43)
MIL-T-20169 - Tubing, Steel, Resistance-Welded (For Oil, Steam, Or Water)
MIL-T-20219 - Tube, Brass, Voice And Pneumatic (Copper Alloy No. 260)
This specification covers seamless drawn brass tube corresponding to copper alloy UNS No. C26000 for shipboard voice and pneumatic service.
MIL-T-21494 - Tube, Aluminum Alloy 5086, Round, Seamless (Extruded Or Drawn) (Use Ww-T-700/5)
MIL-T-21597 - Tube, Aluminum Alloy 5456, Round, Seamless (Extruded Or Drawn)
MIL-T-22214 - Tube, Condenser And Heat Exchanger With Integral Fins (Uns Alloy Nos. C17500, C70600, C12200)
This specification covers integral finned tubes with plain ends of copper nickel alloy and copper for use in heat exchangers and condensers.
MIL-T-22555 - Tubing, Steel Low Carbon, Annealed, Pressure Type (S/S By Mil-T-5066)
This specification covers annealed low carbon steel pressure tubing, for use as hydraulic lines.
MIL-T-22945 - Tube And Pipe, Nickel-Chromium-Iron Alloy Corrosion-Resisting, For Nuclear Plant Service
MIL-T-24107 - Tube, Copper (Seamless) (Copper Alloy Numbers C10100, C10200, C10300, C10800, C12000, C12200, And C14200)
This specification covers seamless copper tube with standard pipe size outside diameters (od), including some intermediate nonstandard sizes. Drawn-temper tubes may be used with brazed or solder type fittings. Annealed-temper tubes may be used with flared, flanged, soldered, or brazed fittings.
MIL-T-24108 - Tube, Condenser And Ferrule Stock, Inhibited Admiralty Metal (Copper Alloy Numbers 443, 444, And 445) (Use Ww-T-756)
MIL-T-3235 - Tube, Copper, Seamless (For Torpedo Use)
This specification covers seamless copper tube for use in torpedoes.
MIL-T-3249 - Tube, Oil, Long Form, 125 Ml
MIL-T-3520 - Tubing, Steel (Low-Carbon) Mechanical Round
MIL-T-3595 - Tubing, Phosphor Bronze: (Cda No. 510) Round, Seamless
This specification covers round seamless phosphor bronze-tubing, furnished in one composition and light and hard drawn tempers.
MIL-T-425 - Tube, Steel: Pipeline Section; With Grooved Nipple Welded On Each End
This specification covers thin wall steel pipe with a grooved pipe nipple welded on each end.
MIL-T-4377 - Tubing-Welded, Round, Carbon Steel Structural (Use Qq-T-830)
MIL-T-46072 - Tube, Round, Copper Alloy Numbers 330, 331, 332, And 370 (Leaded Brass), Seamless
MIL-T-46155 - Tube, Aluminum Alloy, Drawn, Seamless, 6063, T832 (S/S By Astm-B210)
MIL-T-5066 - Tubing, Carbon Steel (1025), Seamless And Welded (Aircraft Quality) (S/S By Sae-Ams-T-5066)
This specification covers carbon steel (1025) tubing of aircraft quality.
MIL-T-52010 - Tube, Corrosion Resisting Steel, Mechanical Seamless And Welded (Use Astm A511-64 And Astm A554-65
MIL-T-52069 - Tube, Commercial Bronze, Seamless (For Microwave Use).
MIL-T-52070 - Tube Nickel, Seamless (For Electronic Use)
MIL-T-52089 - Tube, Steel, Carbon, Mechanical, Shapes Other Than Round, Seamless And Welded.
MIL-T-52234 - Tube, Aluminum Alloy 5083 And 5086, Square, Seamless, Extruded Or Drawn
MIL-T-5695 - Tubing, Steel, Corrosion-Resistant (304), Cold Drawn (For Replacement Information See Notice 5)
This specification covers seamless or welded and drawn tubing of corrosion-resistant steel in the cold drawn condition.
MIL-T-6013 - Tubing, Copper-Silicon-Manganese, Round, Seamless, Annealed, Hydraulic Systems (Navy)
MIL-T-6731 - Tubing, Chrome-Molybdenum (4130) Steel Welded (S/S By Mil-T-6736)
MIL-T-6734 - Tubing, Chrome Nickel Molybdenum (8630) Steel Welded (S/S By Mil-T-6736)
MIL-T-81231 - Tubing, Carbon Steel, Galvanized, Round
MIL-T-8504 - TUBING, STEEL, CORROSION-RESISTANT (304), AEROSPACE VEHICLE HYDRAULIC SYSTEMS, ANNEALED, SEAMLESS AND WELDED
This specification covers requirements for special¿quality, seamless and welded corrosion¿resistant steel tubing in the annealed condition (see 6.1).
MIL-T-855 - Tubing, Aluminum-Alloy (Aluminum-Magnesium-Silicon-Chromium), Drawn (A1-61-S), Seamless (S/S By Ww-T-789)
MIL-T-8606 - Tubing, Steel, Corrosion-Resistant (18-8 Stabilized And Extra Low Carbon) (Use Sae-Ams5560, Sae-Ams5563, Sae-Ams5564, Sae-Ams5565, Sae-Ams5566, Sae-Ams5567, Sae-Ams5569, Sae-Ams5570, Sae-Ams5571, Sae-Ams5639 And Sae-Ams5668)
This specification covers seamless or welded and drawn tubing of stabilized corrosions-and-heat-resistant steel in the annealed condition.
MIL-T-873 - Tubes, Copper, Seamless, 6,000 Psi Maximum Pressure (S/S By Ww-T-797)
MIL-T-8808 - Tubing, Steel, Corrosion-Resistant (18-8 Stabilized), Aircraft Hydraulic Quality (Use Sae-Ams5556 And Sae-Ams5557)
This specification covers seamless or welded and drawn corrosion-resistant steel tubing in the annealed condition.
MIL-T-8887 - Tubing, Steel, Corrosion-Resistant, Heat-Resistant, Stabilized, Welded, Thin Wall (Asg)
This specification covers welded thin wall tubing of stabilized corrosion-and-heat-resistant steel in which the wall thickness is approximately 2 percent of the outside diameter (OD), or less.
MIL-T-8973 - Tubing, Steel, Corrosion And Heat Resistant, For Aerospace Vehicle Hydraulic Systems Assembled By Brazing (S/S By Sae-Ams5897)
This specification covers thin wall close-tolerance 1/8 hard tubing to 1-5/8 inches outside diameter suitable for use in high-pressure hydraulic or pneumatic systems assembled with brazed joints.
MS14300 - Tube, Copper, Seamless (For Use With Solder Flared Or Compression Type Fittings)
MS14301 - Pipe, Steel (Seamless And Seamed) (For Ordinary Use) (S/S By Astm-A120)
MS14302 - (
Images) Pipe, Copper, Seamless, Standard Sizes (S/S By Astm-B42)
MS33529 - Tolerance-Seamless Steel Tubing, Aircraft Airframe, Round (S/S By Sae-Ams2253)
MS33530 - Tolerance-Welded Carbon And Alloy Steel Tubing (Asg) (S/S By Sae-Ams2253)
MS33531 - Tolerance, Welded Corrosion-Resistant Steel Tubing (Asg) (S/S By Sae-Ams2243)
MS33532 - Square And Rectangular Tubing - Carbon Steel And Alloy Steel .35 Carbon, Maximum
MS33534 - ( Images) Standard Dimensions For Streamline And Oval Tubular Shapes
MS33536 - Tolerance-Seamless Steel Tubing, Mechanical, Round
MS33611 - ( Images) Tube Bend Radii (S/S By Sae-As33611)
NSF14 - Piping, Plastics System Components And Related Materials Standard Number 14 For
This standard covers thermoplastic and thermoset plastics piping system components (pipe, fittings, valves, joining materials, appurtenances, etc).
QPL-22245-5 - Pipe And Pipe Fittings, Glass Fiber Reinforced Plastic
QPL-24608 - Pipe, Fittings, And Adhesive Kits, Glass Reinforced Thermosetting Epoxy Resin For Shipboard Piping Systems
QQ-C-806 - Culvert And Underdrain, Corrugated Iron Or Steel, Zinc Coated (S/S By Ww-P-405)
QQ-S-00643 - Steel, Carbon: Tubing, Mechanical, Round: Seamless And Welded (S/S By Qq-T-830)
QQ-T-830 - Tube, Steel, Carbon, Mechanical, Seamless And Welded (Use Astma513 And Astma519)
SS-P-385 - Pipe, Steel, (Cement-Mortar Lining And Reinforced Cement-Mortar Coating)
WW-P-00380 - Pipe And Fittings, Plastic, Rigid (Styrene Rubber, Drain And Sewwer) (S/S By L-P-001221)
WW-P-1432 - Pipe, Steel (Coal Tar Enamel Or Cement-Mortar Lining, And Coal Tar Enamel Coated And Wrapped) (S/S By Awwa-C205 And Awwa-C203)
This specification covers two types of lined steel water pipe with outer coating and wrapping.
WW-P-351 - Pipe, Red Brass, (Copper Alloy No. 230), Seamless Standard Pipe Size, Regular And Extra-Strong (S/S By Astm-B43)
This specification covers seamless red brass, 85 percent (copper alloy No. 230) pipe in all standard pipe sizes.
WW-P-356 - Pipe, Cast-Iron, Drainage, Vent, And Waste (Threaded) (Use Astm A74)
WW-P-360 - Pipe, Cast Iron, Pressure, (For Gas, Water Or Other Liquids) (Use Astm A377)
WW-P-377 - Pipe, Copper, Seamless, Standard Sizes (S/S By Astm-B42)
This specification covers seamless copper pipe, in all standard pipe sizes, regular weight only.
WW-P-401 - Pipe And Pipe Fittings, Cast-Iron, Soil (S/S By Astm-A74 And Cispi301)
WW-P-402 - Pipe, Corrugated (Aluminum Alloy) (S/S By Astm-B745/B745M)
This specification covers corrugated aluminum alloy pipe for use as culverts, storm drains, underdrains, conduits, and miscellanious applications.
WW-P-404 - Pipe, Steel (Seamless & Welded, Black & Zinc Coated) (Galvanized) (S/S By Astm-A53)
This specification covers seamless and welded, black and zinc-coated (galvanized) steel pipe for flanging, bending, and coiling.
WW-P-405 - Pipe, Corrugated (Iron Or Steel, Zinc Coated) (S/S By Astm-A760, Astm-A761, Astm-A761M, Astm-A762, Astm-A762M & Astm-A849)
WW-P-406 - Pipe, Steel (Seamless And Welded) (S/S By Astm-A120)
WW-P-421 - Pipe, Cast Gray And Ductile Iron, Pressure (For Water And Other Liquids) (S/S By Awwa-C110, Awwa-C111, Awwa-C115 And Awwa-C151)
WW-P-441 - Pipe, Wrought Iron, (Welded, Black Or Zinc Coated) (Use Ww-P-406)
WW-T-700 - Tube, Aluminum Alloy, Drawn, Seamless, General Specification For (S/S By Sae-Ams-Ww-T-700)
This specification covers the general requirements for aluminum and aluminum alloy tube; drawn, seamless (see 6.1). Specific requirements for these products in a particular alloy are covered by the applicable detail specification (see 6.3).
WW-T-700/1 - Tube, Aluminum, Drawn, Seamless, 1100 (S/S By Sae-Ams-Ww-T-700/1)
This specification covers the specific requirements for seamless tube drawn from aluminum 1100.
WW-T-700/2 - Tube, Aluminum Alloy, Drawn, Seamless, 3003 (S/S By Sae-Ams-Ww-T-700/2)
WW-T-700/3 - Tube, Aluminum Alloy Drawn, Seamless, 2024 (S/S By Sae-Ams-Ww-T-700/3)
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 2024.
WW-T-700/4 - Tube, Aluminum Alloy, Drawn, Seamless, 5052 (S/S By Sae-Ams-Ww-T-700/4)
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 5052.
WW-T-700/5 - Tube, Aluminum Alloy, Drawn, Seamless, 5086 (S/S By Sae-Ams-Ww-T-700/5)
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 5086.
WW-T-700/6 - Tube, Aluminum Alloy, Drawn, Seamless, 6061 (S/S By Sae-Ams-Ww-T-700/6)
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 6061.
WW-T-700/7 - Tube, Aluminum Alloy, Drawn, Seamless, 7075 (S/S By Sae-Ams-Ww-T-700/7)
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 7075.
WW-T-731 - Tube, Steel And Open Hearth Iron, Seamless And Welded, Boiler Use (Use Astma178 And Astma192)
WW-T-756 - Tube, Condenser And Ferrule Stock, Inhibited Admiralty Metal (Copper Alloy Number 443, 444, And 445)
WW-T-775 - Tube, Copper; Seamless (For Air Conditioning And Refrigeration) (S/S By Astm-B280)
This specification covers seamless copper tube suitable for use with solder-type or flared-tube fittings.
WW-T-783 - Tube, Aluminum Alloy, Round, Square, Rectangular And Other Shapes, Drawn, Seamless, 1100 (S/S By Ww-T-700/1)
WW-T-785 - Tube, Aluminum Alloy, Round, Square, Rectangular, And Other Shapes, Drawn, Seamless 2024 (S/S By Ww-T-700/3)
WW-T-787 - Tube, Aluminum Alloy, Round, Square, Rectangular And Other Shapes, Drawn, Seamless 5052 (S/S By Ww-T-700/4)
WW-T-788 - Tube, Aluminum Alloy, Round, Square, Rectangular And Other Shapes, Drawn, Seamless 3003 (S/S By Ww-T-700/2)
WW-T-789 - Tube, Aluminum Alloy, Round, Square, Rectangular And Other Shapes, Drawn, Seamless 6061, 6062 (S/S By Ww-T-700/6)
WW-T-791 - Tube, Brass, Seamless (S/S By Astm-B135)
WW-T-797 - Tube, Copper, (Seamless) (Use Mil-T-24107)
WW-T-799 - Tube, Copper, Seamless, Water (For Use With Solder- Flared- Or Compression-Type Fittings) (S/S By Astm-B88)
This specification covers seamless copper water tubing in sizes suitable for general plumbing, commonly used with solder, flared, or compression type fittings.
WW-T-825 - Tube, Magnesium-Alloy, Extruded (S/S By Astm-B107/B107M)
WW-U-536 - Union, Malleable-Iron Or Steel, 300-Pound (Use Ww-U-531)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business